wheels and hubs (rims) questions

Redphan wrote:
 > I have a Voyager and I need to get a set og wheels (hubs and tires). The
 > tire size is 215 65 16 and the hubs are 7x16 I think.
 >
 > I am looking at second hand and scrap yards for the hubs. Is there any way
 > to tell from hub markings if the offset, bolt sizes and distribution will
 > fit the Voyager?
 >
 >
Look in the boneyards for another Voyager... Also, the crew at the
boneyard will (should) have a cross reference of rims that will fit your
vehicle, and tell you who has them, if they don't. It's a salvage yard
parts ring kinda thing.

--
Paul
'91 XL1200
'89 White Pig
"I feel more like I do now than when I got here"<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: wheels and hubs (rims) questions 

The front hubs on the Plymouth minivans are press-fitted to the
steering knuckles via the wheel bearings, IIRC, FWIW. And the
knuckles use a tight taper-fit to the upper/lower balljoints and
steering rod end.
 >> Stay informed about: wheels and hubs (rims) questions