Need to remove front lug bolt from 97 Pathfinder

I've got the wheel off, and I've removed the six bolts holding the
plate with the lug bolts to the brake disc. I cannot remove the plate
from the assembly though. It is loosened a little and can spin it
independently of the brake disc.

There is not enough clearance behind the plate and the disc to remove
and replace the lug bolt.

Thank you,
David

InfoSponge3000.RemoveThis@gmail.com wrote:
 > I've got the wheel off, and I've removed the six bolts holding the
 > plate with the lug bolts to the brake disc. I cannot remove the plate
 > from the assembly though. It is loosened a little and can spin it
 > independently of the brake disc.
 >
 > There is not enough clearance behind the plate and the disc to remove
 > and replace the lug bolt.
 >
 > Thank you,
 > David
 >

I'm trying to figure out what you're asking. Is this a 4x4 Pathpuppy?
And you're tryng to remove the rotor? You have to remove the entire hub
assy to do that. Pry the grease cap off, remove the retainer and then
the nut (a spanner or a #2 phillips in a pinch). Once the hub is off you
unbolt the rotor from the back. Be sure to repack the wheel bearing and
the axle bearing on reassembly.

-jim<!-- ~MESSAGE_AFTER~ -->