honda del sol

hi,i have a honda del sol and got a price to the brake job that would
give anyone a heart attack.it is a 1995

with all disk brakes.i have done many brake jobs with no problem.so i
go down the honda dealer and buy the pads cause thats the only place i
could find them.three different kind.
i did the front ones first,never have i done front pads any easer one
bolt lift up the calaper placed the pads in place.thats it.when it was
time to put the calaper back i grease up the pin back plate
i took one of the old pads,placed it on the calaper and squeezed it
right back inside of the calaper
with a c-clamp alls fine.

now igo to the back everything about the same.but when i tried to
squeezed the calaper back inside it would not move and i did not want
to force it.i just priced them the best i found was 500.00 for a pair.
the back appear to be a little different.it has like a hub in the
center and the hub has a slotted like cross.
i remember years ago there was a calaper you had to screw in instead
of forcing back inside with pressure.does anyone know if there is a
special tool,or does it work like the front
i don't want to force if it not going to go.that slotted cross looks
like a place for brake ajustment. the hand brake is also attached to
the rear calaper,thankyou for any help. iamneno

hmm
Uzytkownik "iamneno" <dancingfoolme.RemoveThis@yahoo.com> napisal w wiadomosci
news:1163120019.230175.125480@h54g2000cwb.googlegroups.com...
> hi,i have a honda del sol and got a price to the brake job that would
> give anyone a heart attack.it is a 1995
>
> with all disk brakes.i have done many brake jobs with no problem.so i
> go down the honda dealer and buy the pads cause thats the only place i
> could find them.three different kind.
> i did the front ones first,never have i done front pads any easer one
> bolt lift up the calaper placed the pads in place.thats it.when it was
> time to put the calaper back i grease up the pin back plate
> i took one of the old pads,placed it on the calaper and squeezed it
> right back inside of the calaper
> with a c-clamp alls fine.
>
> now igo to the back everything about the same.but when i tried to
> squeezed the calaper back inside it would not move and i did not want
> to force it.i just priced them the best i found was 500.00 for a pair.
> the back appear to be a little different.it has like a hub in the
> center and the hub has a slotted like cross.
> i remember years ago there was a calaper you had to screw in instead
> of forcing back inside with pressure.does anyone know if there is a
> special tool,or does it work like the front
> i don't want to force if it not going to go.that slotted cross looks
> like a place for brake ajustment. the hand brake is also attached to
> the rear calaper,thankyou for any help. iamneno
>