Flathead builder

Can anybody recommend a really good flathead engine builder in the Los Angeles
area?
Thanks,
Chris
Later,
Chris
Who you callin' a CURMUDGEON!
If you ever see my bike on a trailer, CALL 911! Its stolen.
Iron Butt association
Pull my joint to reply

Chris.......a flathead expert and old dry lakes racer friend of mine
recommends the following:

Probably the best source would be Tony Baron............or H & H in La
Crescenta.............they are both expensive.

Dave Tatom in Oregon is also real good.......and then there's Motor City
Flathead in Detroit, but I realize they are out of the LA area......

I'd personally contact Tony Baron....son of Frank Baron who was a very well
known racer and speed equipment manufacturer in the late 40's and early
50's........check out Tony's web site.......tell him Cousin Brucie
recommended you to him....he's a real straight shooter and a gentleman.....

<a style='text-decoration: underline;' href="http://www.baronracingequipment.com/" target="_blank">http://www.baronracingequipment.com/</a>

Good luck with your flathead....

Cuzn Brucie
***************************************************************************
"Hd36knuckl" <hd36knuckl.TakeThisOut@aol.commyjoint> wrote in message
news:20041127003538.07908.00001279@mb-m07.aol.com...
 > Can anybody recommend a really good flathead engine builder in the Los
 > Angeles
 > area?
 > Thanks,
 > Chris
 > Later,
 > Chris
 > Who you callin' a CURMUDGEON!
 > If you ever see my bike on a trailer, CALL 911! Its stolen.
 > Iron Butt association
 > Pull my joint to reply<!-- ~MESSAGE_AFTER~ -->