Welcome to AutoForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Tacoma Bull Bar

  
   car problems (Home) -> Toyota RSS
Next:  Dodge Ram Oil Pressure  
Author Message
dwk

External


Since: Aug 23, 2004
Posts: 4



(Msg. 1) Posted: Sun Oct 26, 2008 9:57 pm
Post subject: Tacoma Bull Bar
Archived from groups: alt>autos>toyota>trucks (more info?)
I'm looking for a "bull bar" for my 07 Tacoma........the ones from Westin
look good........does anyone know if they are well made? EZ to install?
and most of all, no do they use all of the existing mounting holes w/o
drilling or modifications to the frame or brackets?

 >> Stay informed about: Tacoma Bull Bar 
Back to top
Login to vote
Fuller Wrath

External


Since: Jan 04, 2008
Posts: 20



(Msg. 2) Posted: Mon Oct 27, 2008 6:50 pm
Post subject: Re: Tacoma Bull Bar [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
I had one on my 98 and it bolted on to the tow hook points. It depends on
what you mean by "well made." The quality was excellent however it offers NO
protection from anything. It is of the same gauge steel as nerf or "roll"
bars. It does offer a good place to mount lights since the stock "bumper"
is lame. Mine required NO modifications at all and went on in minutes. I
don't know if anything has changed to the '07.



"dwk" <dwkdwk.DeleteThis@comcast.net> wrote in message
news:as-dnZgnVMWfvZjUnZ2dnUVZ_gCdnZ2d@comcast.com...
> I'm looking for a "bull bar" for my 07 Tacoma........the ones from Westin
> look good........does anyone know if they are well made? EZ to install?
> and most of all, no do they use all of the existing mounting holes w/o
> drilling or modifications to the frame or brackets?
>

 >> Stay informed about: Tacoma Bull Bar 
Back to top
Login to vote
Bruce L. Bergman

External


Since: May 11, 2008
Posts: 7



(Msg. 3) Posted: Mon Oct 27, 2008 10:57 pm
Post subject: Re: Tacoma Bull Bar [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Mon, 27 Oct 2008 18:50:56 -0700, "Fuller Wrath"
<boogerpicker DeleteThis @wazoo.net> wrote:
>"dwk" <dwkdwk DeleteThis @comcast.net> wrote...

>> I'm looking for a "bull bar" for my 07 Tacoma........the ones from Westin
>> look good........does anyone know if they are well made? EZ to install?
>> and most of all, no do they use all of the existing mounting holes w/o
>> drilling or modifications to the frame or brackets?
>
>I had one on my 98 and it bolted on to the tow hook points. It depends on
>what you mean by "well made." The quality was excellent however it offers NO
>protection from anything. It is of the same gauge steel as nerf or "roll"
>bars. It does offer a good place to mount lights since the stock "bumper"
>is lame. Mine required NO modifications at all and went on in minutes. I
>don't know if anything has changed to the '07.

The only way a grille guard would actually guard the grille is if
they have heavy steel back-braces through the grille, through the
radiator support, and back to the chassis to triangulate the mounting
- Effective, but that's a whole lotta custom work.

Any less, and it just folds back at the L brackets at the base.

--<< Bruce >>--
 >> Stay informed about: Tacoma Bull Bar 
Back to top
Login to vote
Mike K

External


Since: Dec 11, 2005
Posts: 13



(Msg. 4) Posted: Tue Oct 28, 2008 4:42 pm
Post subject: Re: Tacoma Bull Bar [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
"Bruce L. Bergman" <brucenospambergman RemoveThis @gmail.invalid> wrote in message
news:hu9dg416v7ddsvn3k567df8ok1up1tvfgq@4ax.com...
> On Mon, 27 Oct 2008 18:50:56 -0700, "Fuller Wrath"
> <boogerpicker RemoveThis @wazoo.net> wrote:
>>"dwk" <dwkdwk RemoveThis @comcast.net> wrote...
>
>>> I'm looking for a "bull bar" for my 07 Tacoma........the ones from
>>> Westin
>>> look good........does anyone know if they are well made? EZ to install?
>>> and most of all, no do they use all of the existing mounting holes w/o
>>> drilling or modifications to the frame or brackets?
>>
>>I had one on my 98 and it bolted on to the tow hook points. It depends on
>>what you mean by "well made." The quality was excellent however it offers
>>NO
>>protection from anything. It is of the same gauge steel as nerf or "roll"
>>bars. It does offer a good place to mount lights since the stock "bumper"
>>is lame. Mine required NO modifications at all and went on in minutes. I
>>don't know if anything has changed to the '07.
>
> The only way a grille guard would actually guard the grille is if
> they have heavy steel back-braces through the grille, through the
> radiator support, and back to the chassis to triangulate the mounting
> - Effective, but that's a whole lotta custom work.
>
> Any less, and it just folds back at the L brackets at the base.
>
> --<< Bruce >>--
>
the grill can be protected without bracing through the grill. But it does
require a substantial mount to the frame.

Mike K
 >> Stay informed about: Tacoma Bull Bar 
Back to top
Login to vote
Fuller Wrath

External


Since: Jan 04, 2008
Posts: 20



(Msg. 5) Posted: Tue Oct 28, 2008 6:14 pm
Post subject: Re: Tacoma Bull Bar [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
You could always go with an ARB but it costs a lot more than a safari bar.
However it does offer a lot more front end protection.


"Mike K" <nojunk.RemoveThis@spamblock.net> wrote in message
news:ge7tf9$vkg$1@aioe.org...
>
> "Bruce L. Bergman" <brucenospambergman.RemoveThis@gmail.invalid> wrote in message
> news:hu9dg416v7ddsvn3k567df8ok1up1tvfgq@4ax.com...
>> On Mon, 27 Oct 2008 18:50:56 -0700, "Fuller Wrath"
>> <boogerpicker.RemoveThis@wazoo.net> wrote:
>>>"dwk" <dwkdwk.RemoveThis@comcast.net> wrote...
>>
>>>> I'm looking for a "bull bar" for my 07 Tacoma........the ones from
>>>> Westin
>>>> look good........does anyone know if they are well made? EZ to
>>>> install?
>>>> and most of all, no do they use all of the existing mounting holes w/o
>>>> drilling or modifications to the frame or brackets?
>>>
>>>I had one on my 98 and it bolted on to the tow hook points. It depends on
>>>what you mean by "well made." The quality was excellent however it offers
>>>NO
>>>protection from anything. It is of the same gauge steel as nerf or "roll"
>>>bars. It does offer a good place to mount lights since the stock
>>>"bumper"
>>>is lame. Mine required NO modifications at all and went on in minutes. I
>>>don't know if anything has changed to the '07.
>>
>> The only way a grille guard would actually guard the grille is if
>> they have heavy steel back-braces through the grille, through the
>> radiator support, and back to the chassis to triangulate the mounting
>> - Effective, but that's a whole lotta custom work.
>>
>> Any less, and it just folds back at the L brackets at the base.
>>
>> --<< Bruce >>--
>>
> the grill can be protected without bracing through the grill. But it does
> require a substantial mount to the frame.
>
> Mike K
>
 >> Stay informed about: Tacoma Bull Bar 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
What Did I do? 04 tacoma - Hey guys, just wondering whats going on. I tried to wire up a trailer harness on my 04 toyota tacoma (did not have a factory) i used just a standard plug. I spliced the wires in the rear of the truck, like I did on any other vehicle I owned. Before i eve...

New Tacoma - Just a quick survey. Does anyone here own a 2005 Tacoma? I'm on the verge of buying one, and want some opinions about them. kinda going back and forth between the Tacoma and the new Nissan Frontier. let me know how you like 'em! TIA

2005 Tacoma SR5 - I"m new to this group and new to buying this truck,2005 Toyota Tacoma Access Cab SR5, had a 1994 ford ranger and traded it in, anyway, I"m looking for another source for accesories for the truck, like a bug shield, dealer prices are outragouos ...

2008 Tacoma - Just checked the toyota Web page on the 08 Tacoma. MPG estimates are listed as 20/25 for 4 cyl. 5 speed. Does anyone know if something has changed to drop the estimates from the 23/28 listed for the 07? Got my 07 Access Cab, 4 cyl, 5 spd, a few months...

07 Tacoma - How do I turn out the "maint reqd" light after changing oil at 5000 mi????
   car problems (Home) -> Toyota All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]