can't get 4.3 TBI to start

Hi all. I swapped an 88 TBI 4.3 into my toyota and I can't get it to
start up again. It was running before I pulled it so I know its
capable. The only thing I did to the internals is change the valve
guide seals, and have since readjusted the valves twice just to make
sure. I redid the wiring with the stock harness and the thing will
crank all day and never start. I have both spark and fuel and the ECM
isn't storing any codes. I'm sure there's some stupid thing that I
missed, and I hope someone out there can help me find it.

Thanks!

<dano0o0o.TakeThisOut@gmail.com> wrote in message
news:77c5f68f-c2ef-4647-a3a3-dab3424ca36c@e23g2000prf.googlegroups.com...
> Hi all. I swapped an 88 TBI 4.3 into my toyota and I can't get it to
> start up again. It was running before I pulled it so I know its
> capable. The only thing I did to the internals is change the valve
> guide seals, and have since readjusted the valves twice just to make
> sure. I redid the wiring with the stock harness and the thing will
> crank all day and never start. I have both spark and fuel and the ECM
> isn't storing any codes. I'm sure there's some stupid thing that I
> missed, and I hope someone out there can help me find it.

Are you 100% sure the distributor is pointing at #1 when #1 is at TDC? I've
removed and reinstalled distributor 180 degrees out many times. And always
felt stupid after...