Welcome to AutoForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Risky way to dry distributor and spark plug wires

 
   car problems (Home) -> Honda RSS
Next:  92 Accord - plug replacement - need advice  
Author Message
Gordito

External


Since: May 11, 2007
Posts: 6



(Msg. 1) Posted: Wed Feb 13, 2008 12:04 pm
Post subject: Risky way to dry distributor and spark plug wires
Archived from groups: alt>autos>honda (more info?)

Problem began recently (92 Accord): after a period of rain, car did
not start, but a day later, it did. Replaced the old plug wires. Car
started and ran well. Today it rained and no start. Sprayed the
distributor and wiring with starting fluid in order to dry them out.
Waited a while, but definitely not long enough because when I hit the
ingition switch, there were flames around the distributor. What a
bummer! Managed to blow them out very quickly though. After a few
minutes now, tried the ignition again and the Accord started right up
- this time had an extiguisher in hand, but it was not needed. Sooo,
this one desperado's way to dry out wet wiring.

Gotta replace the distributor cap now - maybe I won't need to carry
starting fluid in the car.

 >> Stay informed about: Risky way to dry distributor and spark plug wires 
Back to top
Login to vote
bearman

External


Since: Dec 13, 2003
Posts: 164



(Msg. 2) Posted: Wed Feb 13, 2008 12:04 pm
Post subject: Re: Risky way to dry distributor and spark plug wires [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

"Gordito" <patfaulkner.TakeThisOut@chef.net> wrote in message
news:co76r31rjamo5oe6glqqc7irurdjl9pfak@4ax.com...
> Problem began recently (92 Accord): after a period of rain, car did
> not start, but a day later, it did. Replaced the old plug wires. Car
> started and ran well. Today it rained and no start. Sprayed the
> distributor and wiring with starting fluid in order to dry them out.
> Waited a while, but definitely not long enough because when I hit the
> ingition switch, there were flames around the distributor. What a
> bummer! Managed to blow them out very quickly though. After a few
> minutes now, tried the ignition again and the Accord started right up
> - this time had an extiguisher in hand, but it was not needed. Sooo,
> this one desperado's way to dry out wet wiring.
>
> Gotta replace the distributor cap now - maybe I won't need to carry
> starting fluid in the car.

Did you consider using WD-40? The WD stands for Water Displacement.

--
Bearman

If it's got tits, tires, transmissions, tubes, or transistors, it's
trouble.

 >> Stay informed about: Risky way to dry distributor and spark plug wires 
Back to top
Login to vote
DJ NoMore

External


Since: Oct 18, 2007
Posts: 34



(Msg. 3) Posted: Wed Feb 13, 2008 12:04 pm
Post subject: Re: Risky way to dry distributor and spark plug wires [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Gordito wrote:
> Problem began recently (92 Accord): after a period of rain, car did
> not start, but a day later, it did. Replaced the old plug wires. Car
> started and ran well. Today it rained and no start. Sprayed the
> distributor and wiring with starting fluid in order to dry them out.
> Waited a while, but definitely not long enough because when I hit the
> ingition switch, there were flames around the distributor. What a
> bummer! Managed to blow them out very quickly though. After a few
> minutes now, tried the ignition again and the Accord started right up
> - this time had an extiguisher in hand, but it was not needed. Sooo,
> this one desperado's way to dry out wet wiring.
>
> Gotta replace the distributor cap now - maybe I won't need to carry
> starting fluid in the car.
Nothing like a good fire to dry out wet wires. Just be glad that
nothing more happened!
 >> Stay informed about: Risky way to dry distributor and spark plug wires 
Back to top
Login to vote
Al

External


Since: Aug 11, 2007
Posts: 12



(Msg. 4) Posted: Wed Feb 13, 2008 3:54 pm
Post subject: Re: Risky way to dry distributor and spark plug wires [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Are you for real? Starting fluid is not for drying wires, did you read
the back of the can? You are a danger to yourself.

Make sure your medical insurance is paid before you do further work on
your car.




Gordito wrote:
> Problem began recently (92 Accord): after a period of rain, car did
> not start, but a day later, it did. Replaced the old plug wires. Car
> started and ran well. Today it rained and no start. Sprayed the
> distributor and wiring with starting fluid in order to dry them out.
> Waited a while, but definitely not long enough because when I hit the
> ingition switch, there were flames around the distributor. What a
> bummer! Managed to blow them out very quickly though. After a few
> minutes now, tried the ignition again and the Accord started right up
> - this time had an extiguisher in hand, but it was not needed. Sooo,
> this one desperado's way to dry out wet wiring.
>
> Gotta replace the distributor cap now - maybe I won't need to carry
> starting fluid in the car.
 >> Stay informed about: Risky way to dry distributor and spark plug wires 
Back to top
Login to vote
motsco_

External


Since: Nov 05, 2006
Posts: 264



(Msg. 5) Posted: Wed Feb 13, 2008 9:33 pm
Post subject: Re: Risky way to dry distributor and spark plug wires [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

bearman wrote:
> "Gordito" <patfaulkner.RemoveThis@chef.net> wrote in message
> news:co76r31rjamo5oe6glqqc7irurdjl9pfak@4ax.com...
>> Problem began recently (92 Accord): after a period of rain, car did
>> not start, but a day later, it did. Replaced the old plug wires. Car
>> started and ran well. Today it rained and no start. Sprayed the
>> distributor and wiring with starting fluid in order to dry them out.
>> Waited a while, but definitely not long enough because when I hit the
>> ingition switch, there were flames around the distributor.

<SNIP>
> Did you consider using WD-40? The WD stands for Water Displacement.
>
--------------------

I understand you can get on America's Funniest Videos with WD-40 too, if
you try.

'Curly'
 >> Stay informed about: Risky way to dry distributor and spark plug wires 
Back to top
Login to vote
Jeff

External


Since: May 21, 2007
Posts: 965



(Msg. 6) Posted: Wed Feb 13, 2008 10:55 pm
Post subject: Re: Risky way to dry distributor and spark plug wires [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Al wrote:
> Are you for real? Starting fluid is not for drying wires, did you read
> the back of the can? You are a danger to yourself.
>
> Make sure your medical insurance is paid before you do further work on
> your car.
>
>
>
>
> Gordito wrote:
>> Problem began recently (92 Accord): after a period of rain, car did
>> not start, but a day later, it did. Replaced the old plug wires. Car
>> started and ran well. Today it rained and no start. Sprayed the
>> distributor and wiring with starting fluid in order to dry them out.
>> Waited a while, but definitely not long enough because when I hit the
>> ingition switch, there were flames around the distributor. What a
>> bummer! Managed to blow them out very quickly though. After a few
>> minutes now, tried the ignition again and the Accord started right up
>> - this time had an extiguisher in hand, but it was not needed. Sooo,
>> this one desperado's way to dry out wet wiring.
>> Gotta replace the distributor cap now - maybe I won't need to carry
>> starting fluid in the car.

Why do you care if his insurance is paid?

His wife should make sure his life insurance and disability insurance
are paid up, though.

jeff
 >> Stay informed about: Risky way to dry distributor and spark plug wires 
Back to top
Login to vote
Butch Haynes

External


Since: Jan 30, 2008
Posts: 14



(Msg. 7) Posted: Wed Feb 13, 2008 10:55 pm
Post subject: Re: Risky way to dry distributor and spark plug wires [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

"Jeff" <kidsdoc2000.TakeThisOut@hotmail.com> wrote in message
news:0AKsj.335$Cs.99@trnddc04...
> Al wrote:
>> Are you for real? Starting fluid is not for drying wires, did you read
>> the back of the can? You are a danger to yourself.
>>
>> Make sure your medical insurance is paid before you do further work on
>> your car.
>>
>>
>>
>>
>> Gordito wrote:
>>> Problem began recently (92 Accord): after a period of rain, car did
>>> not start, but a day later, it did. Replaced the old plug wires. Car
>>> started and ran well. Today it rained and no start. Sprayed the
>>> distributor and wiring with starting fluid in order to dry them out.
>>> Waited a while, but definitely not long enough because when I hit the
>>> ingition switch, there were flames around the distributor. What a
>>> bummer! Managed to blow them out very quickly though. After a few
>>> minutes now, tried the ignition again and the Accord started right up
>>> - this time had an extiguisher in hand, but it was not needed. Sooo,
>>> this one desperado's way to dry out wet wiring.
>>> Gotta replace the distributor cap now - maybe I won't need to carry
>>> starting fluid in the car.
>
> Why do you care if his insurance is paid?
>
> His wife should make sure his life insurance and disability insurance are
> paid up, though.
>
> jeff

Because if he has no medical insurance and turns himself into a crispy
critter, he'll be admitted to the best burn unit in town where the daily
costs are 4-5 times that of an ordinary hospital room. So guess who'll end
up with the bill-- the taxpayers.......read-- you and me! You do have a job
and pay taxes, don't you?
 >> Stay informed about: Risky way to dry distributor and spark plug wires 
Back to top
Login to vote
Jeff

External


Since: May 21, 2007
Posts: 965



(Msg. 8) Posted: Thu Feb 14, 2008 1:12 am
Post subject: Re: Risky way to dry distributor and spark plug wires [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Butch Haynes wrote:
> "Jeff" <kidsdoc2000.RemoveThis@hotmail.com> wrote in message
> news:0AKsj.335$Cs.99@trnddc04...
>> Al wrote:
>>> Are you for real? Starting fluid is not for drying wires, did you read
>>> the back of the can? You are a danger to yourself.
>>>
>>> Make sure your medical insurance is paid before you do further work on
>>> your car.
>>>
>>>
>>>
>>>
>>> Gordito wrote:
>>>> Problem began recently (92 Accord): after a period of rain, car did
>>>> not start, but a day later, it did. Replaced the old plug wires. Car
>>>> started and ran well. Today it rained and no start. Sprayed the
>>>> distributor and wiring with starting fluid in order to dry them out.
>>>> Waited a while, but definitely not long enough because when I hit the
>>>> ingition switch, there were flames around the distributor. What a
>>>> bummer! Managed to blow them out very quickly though. After a few
>>>> minutes now, tried the ignition again and the Accord started right up
>>>> - this time had an extiguisher in hand, but it was not needed. Sooo,
>>>> this one desperado's way to dry out wet wiring.
>>>> Gotta replace the distributor cap now - maybe I won't need to carry
>>>> starting fluid in the car.
>> Why do you care if his insurance is paid?
>>
>> His wife should make sure his life insurance and disability insurance are
>> paid up, though.
>>
>> jeff
>
> Because if he has no medical insurance and turns himself into a crispy
> critter, he'll be admitted to the best burn unit in town where the daily
> costs are 4-5 times that of an ordinary hospital room. So guess who'll end
> up with the bill-- the taxpayers.......read-- you and me! You do have a job
> and pay taxes, don't you?

And who ends up paying the insurance company?
 >> Stay informed about: Risky way to dry distributor and spark plug wires 
Back to top
Login to vote
Tony Hwang

External


Since: Jul 01, 2003
Posts: 277



(Msg. 9) Posted: Thu Feb 14, 2008 5:58 am
Post subject: Re: Risky way to dry distributor and spark plug wires [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Gordito wrote:
> Problem began recently (92 Accord): after a period of rain, car did
> not start, but a day later, it did. Replaced the old plug wires. Car
> started and ran well. Today it rained and no start. Sprayed the
> distributor and wiring with starting fluid in order to dry them out.
> Waited a while, but definitely not long enough because when I hit the
> ingition switch, there were flames around the distributor. What a
> bummer! Managed to blow them out very quickly though. After a few
> minutes now, tried the ignition again and the Accord started right up
> - this time had an extiguisher in hand, but it was not needed. Sooo,
> this one desperado's way to dry out wet wiring.
>
> Gotta replace the distributor cap now - maybe I won't need to carry
> starting fluid in the car.
Hmmm,
Starting fluid? Are you nuts? You use Silicon such as WD40. Starting fluid?
 >> Stay informed about: Risky way to dry distributor and spark plug wires 
Back to top
Login to vote
Seth

External


Since: Feb 06, 2008
Posts: 4



(Msg. 10) Posted: Thu Feb 14, 2008 7:55 am
Post subject: Re: Risky way to dry distributor and spark plug wires [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

"Al" <al.DeleteThis@spamless.com> wrote in message
news:47b35992$0$25050$607ed4bc@cv.net...
> Are you for real? Starting fluid is not for drying wires, did you read
> the back of the can? You are a danger to yourself.

Only because gasoline is too expensive!

> Make sure your medical insurance is paid before you do further work on
> your car.

Trying to put Darwin out of a job?

> Gordito wrote:
>> Problem began recently (92 Accord): after a period of rain, car did
>> not start, but a day later, it did. Replaced the old plug wires. Car
>> started and ran well. Today it rained and no start. Sprayed the
>> distributor and wiring with starting fluid in order to dry them out.
>> Waited a while, but definitely not long enough because when I hit the
>> ingition switch, there were flames around the distributor. What a
>> bummer! Managed to blow them out very quickly though. After a few
>> minutes now, tried the ignition again and the Accord started right up
>> - this time had an extiguisher in hand, but it was not needed. Sooo,
>> this one desperado's way to dry out wet wiring. Gotta replace the
>> distributor cap now - maybe I won't need to carry
>> starting fluid in the car.
 >> Stay informed about: Risky way to dry distributor and spark plug wires 
Back to top
Login to vote
babbler

External


Since: Feb 10, 2008
Posts: 5



(Msg. 11) Posted: Thu Feb 14, 2008 4:53 pm
Post subject: Re: Risky way to dry distributor and spark plug wires [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Gordito wrote:
> Problem began recently (92 Accord): after a period of rain, car did
> not start, but a day later, it did. Replaced the old plug wires. Car
> started and ran well. Today it rained and no start. Sprayed the
> distributor and wiring with starting fluid in order to dry them out.
> Waited a while, but definitely not long enough because when I hit the
> ingition switch, there were flames around the distributor. What a
> bummer! Managed to blow them out very quickly though. After a few
> minutes now, tried the ignition again and the Accord started right up
> - this time had an extiguisher in hand, but it was not needed. Sooo,
> this one desperado's way to dry out wet wiring.
>
> Gotta replace the distributor cap now - maybe I won't need to carry
> starting fluid in the car.

Dangerous thing to try lad. I used to spray it into the carb of an '83
Pontiac 6000 I had but that was in -20 weather and of course it is very
flamable. With that routine you could get yourself in the next DJackass:
The Movie.
 >> Stay informed about: Risky way to dry distributor and spark plug wires 
Back to top
Login to vote
Butch Haynes

External


Since: Jan 30, 2008
Posts: 14



(Msg. 12) Posted: Fri Feb 15, 2008 4:51 pm
Post subject: Re: Risky way to dry distributor and spark plug wires [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

"Jeff" <kidsdoc2000 DeleteThis @hotmail.com> wrote in message
news:iAMsj.434$xh.224@trnddc03...
> Butch Haynes wrote:
>> "Jeff" <kidsdoc2000 DeleteThis @hotmail.com> wrote in message
>> news:0AKsj.335$Cs.99@trnddc04...
>>> Al wrote:
>>>> Are you for real? Starting fluid is not for drying wires, did you
>>>> read the back of the can? You are a danger to yourself.
>>>>
>>>> Make sure your medical insurance is paid before you do further work on
>>>> your car.
>>>>
>>>>
>>>>
>>>>
>>>> Gordito wrote:
>>>>> Problem began recently (92 Accord): after a period of rain, car did
>>>>> not start, but a day later, it did. Replaced the old plug wires. Car
>>>>> started and ran well. Today it rained and no start. Sprayed the
>>>>> distributor and wiring with starting fluid in order to dry them out.
>>>>> Waited a while, but definitely not long enough because when I hit the
>>>>> ingition switch, there were flames around the distributor. What a
>>>>> bummer! Managed to blow them out very quickly though. After a few
>>>>> minutes now, tried the ignition again and the Accord started right up
>>>>> - this time had an extiguisher in hand, but it was not needed. Sooo,
>>>>> this one desperado's way to dry out wet wiring.
>>>>> Gotta replace the distributor cap now - maybe I won't need to carry
>>>>> starting fluid in the car.
>>> Why do you care if his insurance is paid?
>>>
>>> His wife should make sure his life insurance and disability insurance
>>> are paid up, though.
>>>
>>> jeff
>>
>> Because if he has no medical insurance and turns himself into a crispy
>> critter, he'll be admitted to the best burn unit in town where the daily
>> costs are 4-5 times that of an ordinary hospital room. So guess who'll
>> end up with the bill-- the taxpayers.......read-- you and me! You do have
>> a job and pay taxes, don't you?
>

> And who ends up paying the insurance company?

The voluntary policy holders and the willing investors in the company you
ninny. Ye Gads man, don't you know anything about economics, business or
government?
 >> Stay informed about: Risky way to dry distributor and spark plug wires 
Back to top
Login to vote
Jeff

External


Since: May 21, 2007
Posts: 965



(Msg. 13) Posted: Fri Feb 15, 2008 11:22 pm
Post subject: Re: Risky way to dry distributor and spark plug wires [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Butch Haynes wrote:
> "Jeff" <kidsdoc2000.TakeThisOut@hotmail.com> wrote in message
> news:iAMsj.434$xh.224@trnddc03...
>> Butch Haynes wrote:
>>> "Jeff" <kidsdoc2000.TakeThisOut@hotmail.com> wrote in message
>>> news:0AKsj.335$Cs.99@trnddc04...
>>>> Al wrote:
>>>>> Are you for real? Starting fluid is not for drying wires, did you
>>>>> read the back of the can? You are a danger to yourself.
>>>>>
>>>>> Make sure your medical insurance is paid before you do further work on
>>>>> your car.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Gordito wrote:
>>>>>> Problem began recently (92 Accord): after a period of rain, car did
>>>>>> not start, but a day later, it did. Replaced the old plug wires. Car
>>>>>> started and ran well. Today it rained and no start. Sprayed the
>>>>>> distributor and wiring with starting fluid in order to dry them out.
>>>>>> Waited a while, but definitely not long enough because when I hit the
>>>>>> ingition switch, there were flames around the distributor. What a
>>>>>> bummer! Managed to blow them out very quickly though. After a few
>>>>>> minutes now, tried the ignition again and the Accord started right up
>>>>>> - this time had an extiguisher in hand, but it was not needed. Sooo,
>>>>>> this one desperado's way to dry out wet wiring.
>>>>>> Gotta replace the distributor cap now - maybe I won't need to carry
>>>>>> starting fluid in the car.
>>>> Why do you care if his insurance is paid?
>>>>
>>>> His wife should make sure his life insurance and disability insurance
>>>> are paid up, though.
>>>>
>>>> jeff
>>> Because if he has no medical insurance and turns himself into a crispy
>>> critter, he'll be admitted to the best burn unit in town where the daily
>>> costs are 4-5 times that of an ordinary hospital room. So guess who'll
>>> end up with the bill-- the taxpayers.......read-- you and me! You do have
>>> a job and pay taxes, don't you?
>
>> And who ends up paying the insurance company?
>
> The voluntary policy holders and the willing investors in the company you
> ninny. Ye Gads man, don't you know anything about economics, business or
> government?

More than just the voluntary policy holders and the willing investors.

We end up paying because products cost more, so that the companies can
afford the higher premiums; we make less money, because workers end up
with more copays and higher premiums. And many policy holders are not so
voluntary, because workers typically have only a few choices for health
plans.

Not all the stockholders are voluntary. Pension plan holders and people
who have shares in mutual funds don't have much choice in the selection
of shares.

And if the insurance is Medicare or Medicaid, the owners of the
insurance plan are citizens.

I know quite a bit. I am glad you know something too.

Jeff
 >> Stay informed about: Risky way to dry distributor and spark plug wires 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Good spark plug wires - What make a good spark plug wire ?

Spark Plug Wires for 98 Civic DX - Any thoughts on which brand of wires are the best? What difference would new performance wires make? Thanks.

Spark Plug Question - Hi: I want to put platinum tip spark plugs in my '92 Accord, but I was told by Canadian Tire that I need to tell them whether my engine is an "A1" or an "A6" (its a 2.2 L, by the way). Any ideas on how I can find this out? Thanks in a...

spark plugs - Hi all, has anyone used the new bosch platinum 4's on a 2001 Accord four cylinder or should I stick with the NGK's recommended by my dealer ? Thanks for your opinions.

2000 Civic Oil Drain Pan Plug Problem - I took my car into a place to have the oil changed today. They said that the last mechanic had installed an oversized oil drain pan plug and that it would likely leak. Sure enough... I brought it home and it leaked. The mechanic I brought it to today....
   car problems (Home) -> Honda All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]