Radio change

Quite easy.

You will need to buy a plate which blends in with the dashboard and
retains the CD/ Radio. You may also need to get adaptor cable to connect
the CD/ Radio.

Slip thin 3mm dia pins in the holes in the dashboard around the Readio
push in and pulg the complete radio out.

Then unplug the wiring from the old radio and unplug the aerial cable.

Check the connector on the back of the new radio, if its the same as the
old one you won't need the cable kit and just plug it in. I?f you do need
the cable kit make sure you have the correct one for the new CD / Radio.

Fit the mounting bracket supplied with the CD/ Radio making sure it is
secure and cannot be easily removed - if it comes out easily your new CD
radio will also come out easily for thieves too.

Feed the cables out through the mounting plate, plug in to the new CD
radio - don't forget the aerial cable, and push the whole CD/Radio home.
Check it all works before finishing off. Fit and secure the decorative
cover moulding to finish off the appearance.

Good luck - it took me about 1 hour in total.

--
Message posted using http://www.talkaboutautos.com/group/alt.autos.fiat/
More information at http://www.talkaboutautos.com/faq.html
 >> Stay informed about: Radio change