Powerfist/Princess Auto MIG (220V feedback)

External Since: Aug 13, 2007 Posts: 16

Has anyone ever used the 220V MIG sold at Princess Auto? It's made by
PowerFist which I believe is their offshore import house brand. The unit
has a 3/16" barb for a gas regulator and it comes with the gauges. I need
it to do some light body work and maybe the odd exhaust repair. At this
point I can't commit to a high end machine so I wanted to know if anyone had
feedback on this one???

Thanks.
Andrew.

External Since: Mar 10, 2007 Posts: 5

a few years ago I bought a relatively cheap mig welder from summit racing.
it was not very good for welding sheet metal as the voltage and speed
adjustments weren't fine enough and it was always blowing holes in the
metal. I broke down and bought a Miller mig welder and all of a sudden
could weld sheet metal.
I would have been ahead just buying a real good one right at the start.

Tony
"AWN" <anixon1.DeleteThis@REMOVETHEcogecoDOT.ca> wrote in message
news:C3101EF3.4CA9%anixon1@REMOVETHEcogecoDOT.ca...
> Has anyone ever used the 220V MIG sold at Princess Auto? It's made by
> PowerFist which I believe is their offshore import house brand. The unit
> has a 3/16" barb for a gas regulator and it comes with the gauges. I need
> it to do some light body work and maybe the odd exhaust repair. At this
> point I can't commit to a high end machine so I wanted to know if anyone
> had
> feedback on this one???
>
> Thanks.
> Andrew.
>