Welcome to AutoForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

E32 door brake removal

  
   car problems (Home) -> BMW RSS
Related Topics:
Paintless Dent removal - Have a few small dents, what is the best way to get them out? This paintless dent removal thing work?

Rattle from top of door - Hi, I put a post on here about rattling coming the tops of my doors - off and near side - on my 320d E46 (2003). I was advised to use some vaseline, or similar type and that would sort it. Must be brittle rubber. However - this didn't work..

Front door lock - When I open front door using my key by turning it it takes more effort to turn the key until it unlocks. Please advise what to do. Thank you very much.

E39 Door lock problem. - 528i '97 model. Bought about 6 months ago but I've only just noticed that the keys don't work in the door lock. Not siezed as the barrel moves slightly. The keys enter OK, they just don't turn. Both work fine with the buttons, and also manually on the.

Door handle on 318i 1997 - The driver's side door became totally after I used the key to the car from the side door. Every thing else is working OK. Any idea or would be greatly Thanks.
Next:  BMW: Replacing Camshaft Position Sensor - 1999 528i  
Author Message
PDO

External


Since: Jan 23, 2008
Posts: 3



(Msg. 1) Posted: Mon May 05, 2008 12:58 am
Post subject: E32 door brake removal
Archived from groups: alt>autos>bmw (more info?)
Anyone know how to easily remove the E32 door brake? The door panel is
solid right where the door brake is making its removal difficult. Also, how
do I remove the pin that attaches the door brake arm to the car body? It
doesnt resemble the drawings on the OEM sites. It appears, instead, to have
expanding clips that keep it in place. I'd like to remove without
destroying them. Any ideas? Finally, if you have removed one of these - is
it worth trying to lubricate or should I just buy a replacement? It is
making a terrifyingly loud noise at each detante and the action actually
caused the receiving latch to break the weld.

 >> Stay informed about: E32 door brake removal 
Back to top
Login to vote
Display posts from previous:   
   car problems (Home) -> BMW All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]