Welcome to AutoForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Changing brake light

  
   car problems (Home) -> Dodge RSS
Next:  Thank you Tom  
Author Message
Yellowbeard

External


Since: Jun 06, 2007
Posts: 1



(Msg. 1) Posted: Wed Jun 06, 2007 7:36 pm
Post subject: Changing brake light
Archived from groups: alt>autos>dodge>trucks (more info?)
Need to replace my left brake light and reverse light but after taking
the screws out of the tailgat side of the lens the tail light lens
does not want to come out. Are there more screws? Or is it popedonto
som type of post that it has to be forced off of?

Just do not want to brake it.

 >> Stay informed about: Changing brake light 
Back to top
Login to vote
Tom Lawrence

External


Since: Dec 27, 2003
Posts: 922



(Msg. 2) Posted: Thu Jun 07, 2007 1:13 am
Post subject: Re: Changing brake light [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
> Need to replace my left brake light and reverse light but after taking
> the screws out of the tailgat side of the lens the tail light lens
> does not want to come out. Are there more screws? Or is it popedonto
> som type of post that it has to be forced off of?

Should only be the two screws.... though if you give your year, make, and
model - it would make things easier for everyone.

 >> Stay informed about: Changing brake light 
Back to top
Login to vote
Midlant

External


Since: Mar 03, 2007
Posts: 50



(Msg. 3) Posted: Thu Jun 07, 2007 1:13 am
Post subject: Re: Changing brake light [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Yep, and if it's like my 96 you have to yank on it. It has a couple nail
like fasteners with barbs that hold it in place too.

"Tom Lawrence" <tNlOaSwPrAeMnMcIeN5G.TakeThisOut@earthlink.net> wrote in message
news:3ZI9i.1606$tb6.118@newsread3.news.pas.earthlink.net...
>> Need to replace my left brake light and reverse light but after
>> taking
>> the screws out of the tailgat side of the lens the tail light lens
>> does not want to come out. Are there more screws? Or is it popedonto
>> som type of post that it has to be forced off of?
>
> Should only be the two screws.... though if you give your year, make,
> and model - it would make things easier for everyone.
>
>
 >> Stay informed about: Changing brake light 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
ABS/PARKING Brake Light - I have a 1999 Dodge Ram 4WD 1500. The ABS and Brake light on the dash will not go out. There doesn't appear to be anything wrong with the brakes. I have checked the front and rear brakes and both are good. The brake fluid is full. I do not see any leaks....

brake warning light - The ABS light and parking brake light are stuck in the illuminated mode. Been that way for nearly two years. Is the any solution to this. I have thought about pulling the fuse but that turns off other needed warning lights. I have a 98 Ram SLT

'04 Dakota blowing brake light fuse daily! - HELP! My 2004 Dakota Quad Cab, 4.7ltr. V8, 5Spd Auto with A/C, Trailer Tow Group (34K miles) has been popping "stop lamp" or brake light fuses every day for a few weeks now and I cannot locate the source of the trouble. Here's what I've done: ...

Changing tranny Fluid on 92 Dakota 8 cyl - How do I find the drain plug is there one?

brake problem - I have a 64 Taveco motor home on a 63 dodge truck chaise and am having problems with the brake system. question? Is it possible to update the entire brake system to something more modern. instead of having the traditional brake booster master cylinder..
   car problems (Home) -> Dodge All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]