|
Related Topics:
| 89 F150 Clutch - Hi, I'm back. Now I'm changing the clutch. 4x4 6-cyl. I have the tranny balanced on the cross member and have removed the old clutch, however, I forgot to look at how it came out. Issue 1: The friction plate has a raised center, but I..
1998 F150 4X4 - ABS question - It seems like my ABS has stopped working. I'm getting lockup in the rear, one or the other, or both rear wheels tend to want to lock up when braking. There is no heat build up in the brakes so I assume that the brakes are not dragging all the time, the.
Just bought 89 F150. First question. - I just picked up an 89 F150 long bed 2X4, straight 6 and man trans. Picked it up for $450.00. I plan on replacing the fluids, belt, hoses, etc first thing. Then put on some tires. I am thinking of doing a lift kit, 2 or 3 inches. chassis not body. The
89 F150 fuel question. - I recently picked up a 89 F150 4.9 5 Speed. I have only put about 20 miles on it so far. The front tank reads about 1/4 tank and the truck runs fine. The rear tank reads about 1 1/4 tank and will act like the truck is running out of gas...
89 F150 Seat question - I recently picked up a 89 F150 reg cab and I need to replace the bench seat. It needs the cover, some foam, and springs. What bench seats from other years will mount? I don't care if the seat backs recline or not as there is no room in the cab for them
|
|
|
Next: My 98 4Runner Caught on Fire
|
| Author |
Message |
External
Since: Sep 30, 2007
Posts: 25
|
(Msg. 1) Posted: Wed Feb 27, 2008 8:34 pm
Post subject: 89 F150 clutch question
Archived from groups: alt>trucks>ford (more info?)
|
|
|
My clutch pedal is to low. There is also a sound like the throw out
bearing when the clutch is released. Now I am getting an occasional
popping noise when I press on the clutch. The clutch works fine and the
truck drives fine.
I was thinking that the clutch master is part of the problem.
Any ideas?
Thanks
Ted |
|
| Back to top |
|
 | |
External
Since: Aug 11, 2004
Posts: 681
|
(Msg. 2) Posted: Thu Feb 28, 2008 2:10 am
Post subject: Re: 89 F150 clutch question [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Ted" <miamitedNOSPAM.DeleteThis@bellsouth.net> wrote in message
news:7coxj.111147$K27.16886@bignews6.bellsouth.net...
> My clutch pedal is to low. There is also a sound like the throw out
> bearing when the clutch is released. Now I am getting an occasional
> popping noise when I press on the clutch. The clutch works fine and the
> truck drives fine.
>
> I was thinking that the clutch master is part of the problem.
>
> Any ideas?
>
> Thanks
> Ted
Well that depends on what engine and what tranny you have, key
info you neglected to include.
Whitelightning |
|
| Back to top |
|
| |
External
Since: Sep 30, 2007
Posts: 25
|
(Msg. 3) Posted: Thu Feb 28, 2008 2:11 am
Post subject: Re: 89 F150 clutch question [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Whitelightning" <white.lightning2.DeleteThis@verizon.net> wrote in message
news:TKoxj.6626$Dz4.6216@trnddc01...
>
> "Ted" <miamitedNOSPAM.DeleteThis@bellsouth.net> wrote in message
> news:7coxj.111147$K27.16886@bignews6.bellsouth.net...
>> My clutch pedal is to low. There is also a sound like the throw out
>> bearing when the clutch is released. Now I am getting an occasional
>> popping noise when I press on the clutch. The clutch works fine and the
>> truck drives fine.
>>
>> I was thinking that the clutch master is part of the problem.
>>
>> Any ideas?
>>
>> Thanks
>> Ted
>
> Well that depends on what engine and what tranny you have, key
> info you neglected to include.
>
> Whitelightning
>
Sorry, my bad. 4.9 and 5 speed. >> Stay informed about: 89 F150 clutch question |
|
| Back to top |
|
| |
External
Since: Aug 11, 2004
Posts: 681
|
(Msg. 4) Posted: Thu Feb 28, 2008 4:45 am
Post subject: Re: 89 F150 clutch question [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Ted" <miamitedNOSPAM.TakeThisOut@bellsouth.net> wrote in message
news:zhqxj.111200$K27.4446@bignews6.bellsouth.net...
>
>
> Sorry, my bad. 4.9 and 5 speed.
>
Ok given that info I would suspect the slave, not the master.
On the 5 speed tranny the slave is in the bellhousing actually slides
over the input shaft and includes the throw out bearing. Wonderful
design, not. Bear to bleed, prone to leakage, if leaking replace disc
as well at minimum..
Whitelightning >> Stay informed about: 89 F150 clutch question |
|
| Back to top |
|
| |
External
Since: Sep 30, 2007
Posts: 25
|
(Msg. 5) Posted: Thu Feb 28, 2008 9:26 pm
Post subject: Re: 89 F150 clutch question [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Thanks.
"Whitelightning" <white.lightning2.TakeThisOut@verizon.net> wrote in message
news:S%qxj.13861$Sw6.6761@trnddc06...
>
> "Ted" <miamitedNOSPAM.TakeThisOut@bellsouth.net> wrote in message
> news:zhqxj.111200$K27.4446@bignews6.bellsouth.net...
>>
>>
>> Sorry, my bad. 4.9 and 5 speed.
>>
> Ok given that info I would suspect the slave, not the master.
> On the 5 speed tranny the slave is in the bellhousing actually slides
> over the input shaft and includes the throw out bearing. Wonderful
> design, not. Bear to bleed, prone to leakage, if leaking replace disc
> as well at minimum..
>
> Whitelightning
>
> >> Stay informed about: 89 F150 clutch question |
|
| Back to top |
|
| |
External
Since: Sep 30, 2007
Posts: 25
|
(Msg. 6) Posted: Tue Mar 04, 2008 10:17 pm
Post subject: Re: 89 F150 clutch question [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I think I found the cause of the popping noise. The clutch pedal linkage to
the clutch master cylinder push rod bushing was coming apart. I picked one
up at the parts store and will put it in later this week.
Ted
"Ted" <miamitedNOSPAM.RemoveThis@bellsouth.net> wrote in message
news:h3Kxj.250$rC6.126@bignews4.bellsouth.net...
> Thanks.
> "Whitelightning" <white.lightning2.RemoveThis@verizon.net> wrote in message
> news:S%qxj.13861$Sw6.6761@trnddc06...
>>
>> "Ted" <miamitedNOSPAM.RemoveThis@bellsouth.net> wrote in message
>> news:zhqxj.111200$K27.4446@bignews6.bellsouth.net...
>>>
>>>
>>> Sorry, my bad. 4.9 and 5 speed.
>>>
>> Ok given that info I would suspect the slave, not the master.
>> On the 5 speed tranny the slave is in the bellhousing actually slides
>> over the input shaft and includes the throw out bearing. Wonderful
>> design, not. Bear to bleed, prone to leakage, if leaking replace disc
>> as well at minimum..
>>
>> Whitelightning
>>
>>
>
>
> >> Stay informed about: 89 F150 clutch question |
|
| Back to top |
|
| |
|
FAQ
Search
Profile
Private Messages
Log in
