Welcome to AutoForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

380SE Idle speed controller

 
   car problems (Home) -> Mercedes-Benz RSS
Next:  1957 Packard Clipper  
Author Message
wolff

External


Since: Feb 16, 2005
Posts: 2



(Msg. 1) Posted: Wed Feb 16, 2005 6:37 pm
Post subject: 380SE Idle speed controller
Archived from groups: alt>auto>mercedes (more info?)

All,
In nieed of a rebuilt and / or working Idle speed controller / computer for
ther merz listed above. Location in the DFW, TX area would be a great
help!

Thanks

 >> Stay informed about: 380SE Idle speed controller 
Back to top
Login to vote
Tiger1

External


Since: Jan 07, 2004
Posts: 1258



(Msg. 2) Posted: Sat Feb 19, 2005 4:13 pm
Post subject: Re: 380SE Idle speed controller [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Go to mbcoupes.com and look under part supplier. Are you positive you don't
have a vacuum hose disconnected? If you pull the plug off the idle valve,
does the RPM go higher? If yes, then you got a vacuum leak.

 >> Stay informed about: 380SE Idle speed controller 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
1997 UK W210 e230 idle speed adjustment - The idle speed dropped today and it keeps cutting out which is a pain as it's auto! It will sit there and run fine out of gear - but in gear it cuts our randomly at low revs (once going though is as normal) I had a root around and can't see anything..

mercedes 380SE help - recently my car has had a few problems 1) my radio does not seem to work anymore. i have changed all of the fuses in my car. i think that there is no power going to the radio either. all of the wires are hooked up correctly. do u think that the motor...

1985 380SE Window Wiring - Hello. I need help assembling the wiring on the central console in the front for the rear driver side passenger window. If anybody can provide the wire color and the hole number it belongs to I would greatly appreciate it. Thanks,

380SE Crankcase compression - I have an '84 380se. It has crankcase compression which means it is blowing oil into the air filter at high revs. No problems when below 3000 rpm. Is there a way of preventing or curing this other than a major re-build

Wobble at low speed-Motor Mounts? - 85 300sd wobbles at low speed, especially when accelerating. Have looked at right side motor mount and it is worn down and slightly cracked. Would this be a possible cause? Any other ideas? Since I do need to replace the mount, does anyone have a good..
   car problems (Home) -> Mercedes-Benz All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]