|
Related Topics:
| Servicing 206D - Had 206D since new (X) reg. Left Peugeot agent behind once the three years were up as regards I read something about getting software updates that were only available from Peugeot dealers?
Peugeot 306 - uneconomical to repair? - I took my Peugeot 306 GLX (1998) to a car after a local garage told me they thought the ecu was faulty - but couldn't be sure, after they had replaced the throttle cable following an problem. It does..
Cost of repair work query - Can anyone give me some rough prices I should expect for some work - I've tried my local Peugeot garage, but not quite sure of the figures as the person didn't seem too clued in (lots of maybes and stuff - and the figures seem high). Peugeot 306, 1.4l
106 Tyre Pressure - I recently bought a 2nd hand peugeot 106...but the manule did not come with it. I need to find out the tyre pressure of the car...if anyone knows the answer, or where i can find the answer plz let me know thx Shosh :)
206 central locking problem - Hi, When using the remote or even the key (only tried driver side) both doors and the boot locks pop back up as if the doors are open. (W Reg 18K mileage.) Any way of doors or boot lock actuator motor. Have hear it could be Wiring Loom can..
|
|
|
Next: 2001 (51) 307 1.4 HDI sluggish when cold
|
| Author |
Message |
External
Since: Apr 07, 2008
Posts: 3
|
(Msg. 1) Posted: Mon Apr 07, 2008 6:34 pm
Post subject: 206D scrap or repair?
Archived from groups: alt>autos>peugeot (more info?)
|
|
|
I had hoped that my 206D with 90,000 mls on the clock that I've had from new
(Dec2000 X reg) would last me another 5 years at least. My normal garage
told me they couldn't repair the Suspension radius arm bearings at it needed
a specialist Peugeot tool. The Peugeot dealer has quoted me £1100 quid as
both sides have gone and so has the axle.
Value is £1200.
Any suggestions as to my options greatfully appreciated. |
|
| Back to top |
|
 | |
External
Since: Nov 21, 2005
Posts: 135
|
(Msg. 2) Posted: Mon Apr 07, 2008 7:46 pm
Post subject: Re: 206D scrap or repair? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
| place in devon do axles for peugeots, but sorry cant remenber the name
any be some one on here will come up with the name, but i thin k your
find it cheaper than what you have been quoted,(thats if your in
england)good luck
|
>> Stay informed about: 206D scrap or repair? |
|
| Back to top |
|
| |
External
Since: Nov 21, 2005
Posts: 135
|
(Msg. 3) Posted: Mon Apr 07, 2008 8:04 pm
Post subject: Re: 206D scrap or repair? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
You can buy these arms from a number of motor out-lets.i have looked on
car-parts and they do them,europarts. aswell as camberley autos. so
give them all a try and go for it.then have fun fitting them in.from
chris addlestone surrey. >> Stay informed about: 206D scrap or repair? |
|
| Back to top |
|
| |
External
Since: Apr 07, 2008
Posts: 3
|
(Msg. 4) Posted: Mon Apr 07, 2008 8:04 pm
Post subject: Re: 206D scrap or repair? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Chris" <chris.DeleteThis@orbsrealm.com> wrote in message
news:20080407200439.54895de7@compaq...
> You can buy these arms from a number of motor out-lets.i have looked on
> car-parts and they do them,europarts. aswell as camberley autos. so
> give them all a try and go for it.then have fun fitting them in.from
> chris addlestone surrey.
I'm afraid changing a fuse is my limit on a car. The problem is the non
Peugeot garage say they can't do it that it has to be done by a Peugeot
dealer.
Trevor
East Yorkshire
England >> Stay informed about: 206D scrap or repair? |
|
| Back to top |
|
| |
External
Since: Mar 17, 2008
Posts: 8
|
(Msg. 5) Posted: Mon Apr 07, 2008 9:04 pm
Post subject: Re: 206D scrap or repair? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Trevor" <trevor.RemoveThis@nospam.woldsweather.co.uk> wrote in message
news:4e039$47fa5b16$50e5af86$23640@news.eurofeeds.com...
>I had hoped that my 206D with 90,000 mls on the clock that I've had from
>new (Dec2000 X reg) would last me another 5 years at least. My normal
>garage told me they couldn't repair the Suspension radius arm bearings at
>it needed a specialist Peugeot tool. The Peugeot dealer has quoted me £1100
>quid as both sides have gone and so has the axle.
>
> Value is £1200.
>
> Any suggestions as to my options greatfully appreciated.
I think this is the place that Chris had in mind but they only actually
mention rear suspension. Having said that, a phone call is not expensive
and they may well know somebody who does front ends if they don't
themselves.
http://www.sspengineering.co.uk/
--
Keith Willcocks
(If you can't laugh at life, it ain't worth living!) >> Stay informed about: 206D scrap or repair? |
|
| Back to top |
|
| |
External
Since: Aug 28, 2006
Posts: 6
|
(Msg. 6) Posted: Mon Apr 07, 2008 9:08 pm
Post subject: Re: 206D scrap or repair? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Chris <chris DeleteThis @orbsrealm.com> wrote:
> place in devon do axles for peugeots, but sorry cant remenber the name
> any be some one on here will come up with the name, but i thin k your
> find it cheaper than what you have been quoted,(thats if your in
> england)good luck
These are the people - http://www.sspengineering.co.uk/ .
I can heartily recommend them from personal experience. If you drive down
there (by appointment) they will fit a reconditioned supension in a couple
of hours or so.
Peter >> Stay informed about: 206D scrap or repair? |
|
| Back to top |
|
| |
External
Since: Apr 07, 2008
Posts: 3
|
(Msg. 7) Posted: Tue Apr 08, 2008 5:45 pm
Post subject: Re: 206D scrap or repair? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Keith Willcocks" <invalidaddress.RemoveThis@invalidaddress.invalid> wrote in message
news:ftduni$tbf$1@news.albasani.net...
>
> "Trevor" <trevor.RemoveThis@nospam.woldsweather.co.uk> wrote in message
> news:4e039$47fa5b16$50e5af86$23640@news.eurofeeds.com...
>>I had hoped that my 206D with 90,000 mls on the clock that I've had from
>>new (Dec2000 X reg) would last me another 5 years at least. My normal
>>garage told me they couldn't repair the Suspension radius arm bearings at
>>it needed a specialist Peugeot tool. The Peugeot dealer has quoted me
>>£1100 quid as both sides have gone and so has the axle.
>>
>> Value is £1200.
>>
>> Any suggestions as to my options greatfully appreciated.
>
>
> I think this is the place that Chris had in mind but they only actually
> mention rear suspension. Having said that, a phone call is not expensive
> and they may well know somebody who does front ends if they don't
> themselves.
> http://www.sspengineering.co.uk/
> --
> Keith Willcocks
> (If you can't laugh at life, it ain't worth living!)
>
A local garage I hadn't been to before has recommened findapart.com to get
the axle and then they'll fit it. >> Stay informed about: 206D scrap or repair? |
|
| Back to top |
|
| |
External
Since: Mar 17, 2008
Posts: 8
|
(Msg. 8) Posted: Tue Apr 08, 2008 8:02 pm
Post subject: Re: 206D scrap or repair? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Trevor" <trevor RemoveThis @nospam.woldsweather.co.uk> wrote in message
news:e019f$47fba120$50e5af86$5223@news.eurofeeds.com...
>
> "Keith Willcocks" <invalidaddress RemoveThis @invalidaddress.invalid> wrote in message
> news:ftduni$tbf$1@news.albasani.net...
>>
>> "Trevor" <trevor RemoveThis @nospam.woldsweather.co.uk> wrote in message
>> news:4e039$47fa5b16$50e5af86$23640@news.eurofeeds.com...
>>>I had hoped that my 206D with 90,000 mls on the clock that I've had from
>>>new (Dec2000 X reg) would last me another 5 years at least. My normal
>>>garage told me they couldn't repair the Suspension radius arm bearings at
>>>it needed a specialist Peugeot tool. The Peugeot dealer has quoted me
>>>£1100 quid as both sides have gone and so has the axle.
>>>
>>> Value is £1200.
>>>
>>> Any suggestions as to my options greatfully appreciated.
>>
>>
>> I think this is the place that Chris had in mind but they only actually
>> mention rear suspension. Having said that, a phone call is not
>> expensive and they may well know somebody who does front ends if they
>> don't themselves.
>> http://www.sspengineering.co.uk/
>> --
>> Keith Willcocks
>> (If you can't laugh at life, it ain't worth living!)
>>
>
>
> A local garage I hadn't been to before has recommened findapart.com to get
> the axle and then they'll fit it.
FindaPart deal with breakers so you will be getting a used unit. Could be
OK but you could also be no better off after a while. Good luck anyway.
--
Keith Willcocks
(If you can't laugh at life, it ain't worth living!) >> Stay informed about: 206D scrap or repair? |
|
| Back to top |
|
| |
|
FAQ
Search
Profile
Private Messages
Log in
