Welcome to AutoForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

1988 buick park avenue 3.8 ltr

 
   car problems (Home) -> GM RSS
Next:  Manual transmission fluid: replace? fill ? 2001 G..  
Author Message
daviee

External


Since: Oct 30, 2005
Posts: 3



(Msg. 1) Posted: Sun Oct 30, 2005 1:48 am
Post subject: 1988 buick park avenue 3.8 ltr
Archived from groups: alt>autos>gm (more info?)

my 88 park avenue stopped running and acts like it might start but doesnt.
any ideas?

 >> Stay informed about: 1988 buick park avenue 3.8 ltr 
Back to top
Login to vote
oldkid

External


Since: Oct 27, 2005
Posts: 20



(Msg. 2) Posted: Sun Oct 30, 2005 5:05 pm
Post subject: Re: 1988 buick park avenue 3.8 ltr [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

old car.whats the motor.what's the mileage.if the fuel pump has never
been replaced it seems a prime suspect.squirt gas directly in air
intake and see if it runs.if no i would suspect ignition modual or
coil.if 3800 could also be timming chain.(high mileage)any recent work
to motor or car..more details mean a better diagnosis.

 >> Stay informed about: 1988 buick park avenue 3.8 ltr 
Back to top
Login to vote
daviee

External


Since: Oct 30, 2005
Posts: 3



(Msg. 3) Posted: Mon Oct 31, 2005 10:09 pm
Post subject: Re: 1988 buick park avenue 3.8 ltr [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

i checked the fuel pump ignition has spark and i was told that this motor
doesnt have a timing chain but gears instead..not sure if this is correct
 >> Stay informed about: 1988 buick park avenue 3.8 ltr 
Back to top
Login to vote
daviee

External


Since: Oct 30, 2005
Posts: 3



(Msg. 4) Posted: Mon Oct 31, 2005 10:16 pm
Post subject: Re: 1988 buick park avenue 3.8 ltr [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

i tried spraying carb cleaner into intake...didnt help..it does have
130,000 miles on engine..no recent work done on it and someone said check
the ..ill call it harmonic balancer cause they have a rubber insert and
have a sensor that ...well i forgot but i did check the rubber insert
thing and seems ok..im still lost
 >> Stay informed about: 1988 buick park avenue 3.8 ltr 
Back to top
Login to vote
HLS

External


Since: May 10, 2005
Posts: 390



(Msg. 5) Posted: Thu Nov 03, 2005 7:55 pm
Post subject: Re: 1988 buick park avenue 3.8 ltr [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

"daviee" <howardsternhere.TakeThisOut@yahoo.com> wrote in message
news:43d34963c9282824dae34312c79839f6@localhost.talkaboutautos.com...
> i checked the fuel pump ignition has spark and i was told that this motor
> doesnt have a timing chain but gears instead..not sure if this is correct

How much fuel pressure did you register?

I show it as having a timing chain, and an internal balance shaft geared
to the camshaft. Maybe I am off by a couple of years.

If your spark does not come exactly when the cylinder has fuel
charge and compression, it will run roughy or not at all.
 >> Stay informed about: 1988 buick park avenue 3.8 ltr 
Back to top
Login to vote
HLS

External


Since: May 10, 2005
Posts: 390



(Msg. 6) Posted: Thu Nov 03, 2005 11:55 pm
Post subject: Re: 1988 buick park avenue 3.8 ltr [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

"daviee" <howardsternhere RemoveThis @yahoo.com> wrote in message
news:ccaa59008d9a375e3e47d5a50a93781c@localhost.talkaboutautos.com...
> i tried spraying carb cleaner into intake...didnt help..it does have
> 130,000 miles on engine..no recent work done on it and someone said check
> the ..ill call it harmonic balancer cause they have a rubber insert and
> have a sensor that ...well i forgot but i did check the rubber insert
> thing and seems ok..im still lost

There is sensor in the timing chain cover, which is actuated by a magnet
attached
to the gear. It is not uncommon for that magnet to fall off, and a code
will be set.
It does not stop the engine from running, in my experience.
 >> Stay informed about: 1988 buick park avenue 3.8 ltr 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
1997 Buick Park Avenue - Can't figure out how to remove and replace the Serpentine belt. Looks like the entire engine mount has to come off. Am I missing the boat and the operation is not that difficult? Bob

Need parts for my 1991 Buick Park Avenue Ultra - I have a 1991 Buick Park Avenue Ultra that is champagne colored. The plastic horn buttons that are mounted on the steering wheel are both broken. Where can I find replacement buttons? Thanks.

Buick Park Avenue Mass Airflow Sensor - I have a parts list of everything down to the last bolt on 97-05 Park Avenues, but the the one part number I need, the list doesn't have. Can anyone tell me, or direct me to how I can find, the part number for a 2000 PA Ultra MAF sensor? Thanks, Jef...

91 park avenue won't turn over - Ok boys and girls I just left my 1991 park avenue up at a convenience store because I pulled up, went inside, and came back out. I tried to start the car but the car will not turn over at all. It has always run fine. It does have a security key..

Intake Failure 3800 Park Avenue - Well group it havent been 2 weeks befor i thought i had saved my self some big bucks .. Sunday nite my park avenue quit on my while traveling down I-85. Started making rattling noise and died, Had car towed back to Sandy's Service center which they brok...
   car problems (Home) -> GM All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]