07 charger ball joint

"budslave" <budslave.TakeThisOut@optonline.net> wrote in message
news:MPG.221f63244e7bcbe4989681@news.optonline.net...
> [This followup was posted to alt.autos.dodge and a copy was sent to the
> cited author.]
>
> Hey everyone
> does any one know if I have to
> replace the whole front spindle
> because of a broken ball joint
> or can I just replace the ball
> joint from the spindle.


I did a quick check in the Autozone parts site, and it would appear that you
can
replace the ball joint, 2WD or 4WD, independently of the spindle. This is,
in my
experience, a typical situation.

You might want to get your parts from some other supplier, like NAPA, but
that is your choice.

Dealerships dont necessarily do you any favors, nor are the parts
necessarily
any better than, or as good as, good aftermarket parts.
 >> Stay informed about: 07 charger ball joint 

On Thu, 13 Mar 2008 20:21:44 -0500, HLS wrote:

>
> "budslave" <budslave.RemoveThis@optonline.net> wrote in message
> news:MPG.221f63244e7bcbe4989681@news.optonline.net...
>> [This followup was posted to alt.autos.dodge and a copy was sent to the
>> cited author.]
>>
>> Hey everyone
>> does any one know if I have to
>> replace the whole front spindle
>> because of a broken ball joint
>> or can I just replace the ball
>> joint from the spindle.
>
>
> I did a quick check in the Autozone parts site, and it would appear that
> you can
> replace the ball joint, 2WD or 4WD, independently of the spindle. This
> is, in my
> experience, a typical situation.
>
> You might want to get your parts from some other supplier, like NAPA, but
> that is your choice.
>
> Dealerships dont necessarily do you any favors, nor are the parts
> necessarily
> any better than, or as good as, good aftermarket parts.


What are *YOU* doing *HERE*?
 >> Stay informed about: 07 charger ball joint 

On Thu, 13 Mar 2008 20:21:44 -0500, HLS wrote:

>
> "budslave" <budslave RemoveThis @optonline.net> wrote in message
> news:MPG.221f63244e7bcbe4989681@news.optonline.net...
>> [This followup was posted to alt.autos.dodge and a copy was sent to the
>> cited author.]
>>
>> Hey everyone
>> does any one know if I have to
>> replace the whole front spindle
>> because of a broken ball joint
>> or can I just replace the ball
>> joint from the spindle.
>
>
> I did a quick check in the Autozone parts site, and it would appear that
> you can
> replace the ball joint, 2WD or 4WD, independently of the spindle. This
> is, in my
> experience, a typical situation.
>
> You might want to get your parts from some other supplier, like NAPA, but
> that is your choice.
>
> Dealerships dont necessarily do you any favors, nor are the parts
> necessarily
> any better than, or as good as, good aftermarket parts.


HTF did I end up as "Moonbat"?????
 >> Stay informed about: 07 charger ball joint